商務談判中國標準用詞規范
通用計量術語及定義
General Terms in Metrology and Their Definitions
國家計量檢定規程編寫規則
The Rules for Drafting National Metrological Verification Regulation
流量計量名詞術語及定義
Metrological Terms and Their Definitions for Flow Rate
標準物資常用術語(試行)
General Terms of Reference Material
容量、密度計量名詞術語及定義(試行)
Terminology and Definitions for Measurement of Capacity Density
罐內液體石油產品計量技術規范
Technical Norm of the Measurement of Liquid Petroleum Products in Tanks
計量器具定型通用規范
The General Norm for Pattern Evaluation of Measuring Instruments
計量器具定型鑒定規范的編寫導則
Rules for Drafting Norms of Pattern Evraluation of Measuring Instruments
產品質量檢驗機構計量認證技術考核規范
The Technical Examination Norm for Metrology Accreditation of Testing Unit for Testing of Product Quality
計量標準命名規范
The Technical Norm of Designation for Metrological Standard
計量器具的可靠性分析原則
Technical Norm of Reliability Analysis Principle for Measuring Instruments
測量誤差及數據處理技術規范(試行)
Technical Norm for Error of Measurements and Interpretation of Data
計量標準考核規范
Technical Norm of Check for Standard of Measurement
工作計量器具命名與分類代碼規范
Norm of Designation for Working Measuring Instrument and its Classification Code
燃油加油機稅控裝置技術規范
The Technical Norm For Revenue Control Device of Fuel Dispenser
測量不確定度評定與表示
Evaluation and Expression of Uncertainty in Measurement
稅控燃油加油機定型鑒定大綱
The Program for Pattern Evaluation of Fuel Dispensers with Revenue Function
稅控燃油加油機制造許可證考核規范
The Examination Specification of Manufacturing Competence for Fuel Dispensers with Revenue Function
法定計量檢定機構考核規范
Specification for the Examination of the Services of Legal Metrological Verification
定量包裝商品凈含量計量檢驗規則
The Rules of Metrological Inspection for Net Content of Prepackeged Commidity with Fixed Content
國家校準規范編寫導則
The Rules for Drafting National Calibration Specifications
膜式煤氣表定型鑒定大綱
The Program for Pattern Evaluation of Diaphragm Gas
Meters
印制板用處理"E"玻璃纖維紙
Specification for
"E" glass paper for printed boards
印制板用處理"E"玻璃纖維布
Specification for finished fabric woven from "E" glass for printed boards
LED顯示屏通用規范
Generic specification for LED panels
LED顯示屏測試方法
Test methods for LED panels
移動通信網室內分布系統標準
Standard of indoor distributing system of mobile communication network
寬帶無線IP技術規范
Broadband wireless IP Technology specification
移動IP技術規范
Mobile IP Technology specification
應用于無線IP技術的網絡(luò )安全規范
Network security specification for wireless IP Technology
無線局域網媒體訪問控制和物理層規范
Wireless Lan Medium Access Control(MAC) and physical layer(PHY) specifications
無線局域網媒體訪問控制和物理層規范2.4GHz頻段較高速物理層擴展規范
Wireless LAN Medium Access Control(MAC) and physical layer(PHY) specifications: Higher- Speed Physical Layer Extension in the 2.4GHz Band
無線局域網媒體訪問控制和物理層規范5GHz頻段高速物理層擴展規范
Wireless LAN Medium Access Control(MAC) and physical layer(PHY) specifications: High Speed Physical Layer in the 5GHz Band
高速率無線IP移動通信系統標準
The High-Date-Rate wireless Mobil IP communication system standard
中小企業信息化技術規范
Technical Specification for Informationalization of Middle and Small Enterprises
中小企業信息化建設規范實施指南
Guide for the Implementation of Informationalization Construction Specification of Middle and Small Enterprises
陰極射線管玻殼檢驗規范
Inspection standards for glass bulbs for cathode-ray tubes
顯像管玻殼型號命名方法
The type designation for picture tube bulbs
陰極射線管有效屏面缺陷規范
Defect criteria in useful screen area for cathode ray tubes
電子元器件詳細規范
MYS4、 MYS5、MYS6、MYS8防雷指示型過電壓保護器
評定水平E
Detail specifications of electronic and element device for lighting surge protective device with fault-indication of type MYS4、 MYS5、MYS6、MYS8
Assessment level E
空調器用步進電動機詳細規范
Stepping motor for air conditioning detail specification
空調器用無刷直流風機詳細規范
Brushless D.C blower for air conditioning detail specification
數字式角度測量?jì)x規范
Digital clinometer
綜合智能交通電子信息系統技術體系規范
Specification of technical system of integrated intelligent traffic electronic information system
數字電視接收設備內部開放總線規范
Specification of inner open bus for digital television receivers
數字音頻接口
Digital audio interface
數字功率放大器系統技術規范
Specification of system technology for digital power amplifier
數字功率放大器性能測量方法
Method of performance measurement for digital power amplifier
數字功率放大器通用規范
General specification for digital power amplifier
汽車彩色顯示器通用技術條件
General specification for bus video monitor
臥式液相外延系統通用規范
Generic regulation for horizontal liquid phase epitaxial system
推板式高溫隧道電窯通用規范
Generic regulation for pusher type high temperature electro-heat tunnel kiln
表面組裝技術術語
Terminology for surface mount technology
彩色電視廣播接收機技術參數要求
Requirement of technology parameters for colour broadcasting television receivers
數字電視接收機及機頂盒外部接口規范
Specification of outer interfaces for digital television receivers and set-top boxes
數字電視接收設備信道與信源間模塊接口規范
Specification of interfaces between channels and sources modules for digital television receivers
電子設備用固定電感器總規范(SJ2885-88)
General specification for fixed inductors for use in electronic equipment(SJ2885-88)
電子設備用片式固定電感器空白詳細規范
Blank detail specification for chip fixed inductors for use in electronic equipment
電子設備用壓敏電阻器
Varistors for use in electronic equipment
Part3: Blank detail specification for lightning surge protective with fault-indication
Assessment level E
電子設備用壓敏電阻器 第3部分：分規范
防雷型壓敏電阻器
Varistors for use in electronic equipment
Part 3: Sectional specification for lightning protection varistors
永磁鐵氧體材料物理分析方法( SJ/T10411-93)
Physical analysis methods for permanent ferrite materials
永磁鐵氧體材料(SJ/T10410-93)
Permanent ferrite materials
永磁鐵氧體料粉(SJ/T10412-93)
Permanent ferrite powder
磁性氧化物制成的'RM磁芯及其附件的尺寸(SJ/T2744-87)
Dimensions of RM cores made of magnetic oxides and associated parts
電子工業用免清洗液態助焊劑
NO- clean liquid soldering flux
電子及電器工業用硅微粉(SJ/T10675-1995)
Silicon dioxide micropowder for electronic and electrical part
信息技術鼠標器通用規范
Information Technology-General specification for mouse
面向對象領域工程指南
Guide of object-oriented domain engineering
面向對象的軟件系統建模規范
第1部分：概念與表示法
Specification of object-oriented software system modeling
Part1:Concept and notation
面向對象的軟件系統建模規范
第3部分：文檔編制
Specification of object-oriented software system modeling
Part3: documentation
噴墨打印機用墨盒通用規范
General specification for cartridge-spare part of Ink-Jet machine
軟磁鐵氧體料粉
Soft ferrite powder
微波爐磁控管用永磁鐵氧體磁體分規范
Sectional specification for permanent ferrite magnets for microwave oven magnetron
揚聲器用永磁鐵氧體磁體尺寸及公差
Dimension and tolerance for permanent ferrite magnets for speakers
互聯網機頂盒通用規范
Generic specification for Internet set-top box
電子設備用壓敏電阻器安全要求
Safety requirements for varistors for use in electronic equipment
電子設備的安全
Safety of electronic equipment
防靜電周轉容器通用規范
General specification for reusable containers and boxes for electrostatic protection
【商務談判中國標準用詞規范】相關文章：
商務談判常用詞匯11-15
商務談判著裝禮儀規范12-01
規范格式標準08-17
中國式商務談判12-17
學生儀容儀表規范標準12-12
中國商務談判禮儀常識10-01
商務人員儀表禮儀規范標準09-23
中國外交英語常用詞10-13